快速門展示
作者：沈陽雷達感應快速門 發布時間： 2019/6/19 17:46:43
「沈陽快速門」雷達感應開關助快速門完成自動開啟
"Shenyang Express Gate" Radar Induction Switch Helps the Express Gate to Open automatically
雷達感應式開啟是快速門在實際應用中，非常實用的一種開門方式，幫企業主們輕松管理通道，完成非接觸式感應開門，十分便捷。
Radar induction opening is a very practical way of opening fast doors in practical applications. It can help business owners easily manage channels and complete non-contact induction opening, which is very convenient.
在很多的廠房，地下車庫中，用戶都會選擇它，而且安全調試也比較簡單，實用壽命高，維修成本低。
In many factories and underground garages, users will choose it, and safety debugging is relatively simple, practical life is high, maintenance cost is low.
雷達感應開關，又稱微波感應開關，是根據多普勒效應為基礎，采用最先進的平面天線。
Radar induction switch, also known as microwave induction switch, is based on Doppler effect and adopts the most advanced planar antenna.
「沈陽快速門」雷達感應開關助快速門完成自動開啟
"Shenyang Express Gate" Radar Induction Switch Helps the Express Gate to Open automatically
在快速門的應用當中，有以下幾個注意事項。
In the application of fast doors, there are the following points for attention.
1.禁止帶電安裝操作，嚴禁負載短路，在接線和調試過程中，應切斷電源，避免發生危險。
1. It is forbidden to install on-line operation and short circuit of load. During wiring and debugging, power supply should be cut off to avoid danger.
2.禁止超荷載功率使用。
2. The use of overload power is prohibited.
3.當墻壁厚度小于10厘米時，該開關有可能會隔墻感應，有些用戶發現快速門有誤操作的現象，就是這原因。
3. When the wall thickness is less than 10 centimeters, the switch may be induced by the partition wall, which is the reason why some users find that the fast door is misoperated.
4.在感應區域內，不要有影響其探測的障礙物或不停運動的物體，否則會導致快速門的頻繁誤開啟。
4. In the sensing area, there should be no obstacles or moving objects affecting its detection, otherwise it will lead to frequent false opening of the fast door.
5.不要以動蕩不定的物體作為安裝基面，比如，有的用戶選擇安裝在門罩上門，這樣的話，當門在運行的過程中，不可避免的會有些震動，久而久之就會導致雷達感應的范圍偏離。
5. Don't use unstable objects as the base of installation. For example, some users choose to install the door cover. In this case, when the door is running, there will inevitably be some vibration, which will lead to the deviation of radar sensing range over time.
建議安裝在門上的墻面或者固定梁上。
It is recommended to install on the wall or fixed beam of the door.
功能與特點
Functions and Characteristics
1．智能感應：當有人進入本產品的探測范圍，微波探測器工作點亮燈，當人離開探測范圍后，燈自動熄滅。感應距離為6~8米（可調）
1. Intelligent induction: When someone enters the detection range of this product, the microwave detector works to light the lamp, and when the person leaves the detection range, the lamp automatically goes out. Induction distance is 6-8 meters (adjustable)
2．智能延時：開關在檢測到人體的每一次活動后會自動順延一個周期，并以最后一次人體活動的順延時間為起始點。延時時間為18~25秒（可調）
2. Intelligent Delay: The switch automatically delays a cycle after detecting each human activity, and takes the last human activity delay as the starting point. Delay time is 18-25 seconds (adjustable)
3.工作方式：感應開關接通后，在延時時間段內，如有人體活動，開關將持續接通，直到人離開并順延時間。
3. Working mode: After the induction switch is switched on, during the delay period, if there is human activity, the switch will continue to be switched on until the person leaves and delays the time.
以上功能是在快速門中使用最廣泛的。
The above functions are most widely used in express doors.
相關新聞: